Northern Airborne Technology NPX136D User Manual

Page 33

NPX136D Series Panel Mount P25 VHF Transceiver

SM68 Installation and Operation Manual

Section 3 Rev: 1.00 Issue 4 Page 3-7

ENG-FORM: 806-0114.DOT

CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.

3.4.1.5

Scan Flags

Scan flags denote the channels that will be checked during scanning.

indicates the current channel is

checked when list scanning.

indicates the current channel is checked during priority scan. If a channel

is set as a priority scan channel and a list scan channel just the priority scan flag is shown.

3.4.1.6 Display

Type

The display type is selected with the Display switch. The display types are R: for receive display,

: for

transmit display.

: for simplex display,

: for zone display,

Rx TGID

: for receive talk group,

Tx TGID

: for transmit talk group and

Splx TGID

: for simplex talk group. The display types shown are

dependent on the current radio configuration.

3.4.1.6.1

Receive Display (Duplex Mode)

R:173.9975 ---

Shows the receive frequency in MHz to four decimal places and the receive squelch mode. For analog
channels the receive squelch mode is the analog tone frequency or code, or dashed lines if no tone is
selected. For digital channels the receive squelch mode is the receive network access code or MON if the
digital squelch mode is set to monitor. Also, for digital channels, the talk group flag

is shown if the

channel's digital squelch mode is set to select. See section

3.6.3.

3.4.1.6.2 Transmit Display (Duplex Mode)

T:173.9975 --- LO

Shows the transmit frequency in MHz to four decimal places and the transmit squelch mode. For analog
channels the transmit squelch mode is the analog tone frequency or code, or dashed lines if no tone is
selected. For digital channels this is the transmit network access code. Also shown is the transmit power
flag

for the NPX136D's transmit power setting. See section

3.6.3.

3.4.1.6.3 Simplex Display (Simplex Mode)

S:173.9975 --- LO
If the Transmit mode is set to Simplex, the simplex display shows the receive and transmit frequency in
MHz to four decimal places, and the receive and transmit squelch mode. The transmit power flag

also shown. See section

3.6.3.

3.4.1.6.4

Zone display

Z:All ALL CHANS

Shows the zone number and zone name for the current zone. The zone display is shown when zones are
turned on from the edit zone menu.

3.4.1.6.5

Receive Talk Group ID (Duplex Mode)

Rx TGID: 12345

Shows the receive talk group ID for the channel. Shown for digital channels with the digital squelch set to
select when turned on from the display settings talk group field.