Nortec MH Series - Manual (Page 46)

42 | MH Series
Dismantling and Installation Works
Dismantle and Install the Mist Eliminator and Humidification Boxes
1. Undo the hose clamps, then pull
off the hoses from the connections
on the spray bar caps.
2. Lift the spray bar caps on the
water connection side. Remove
them by sliding them directly away
from the mounting frame.
3. Starting from the top remove the
mist eliminator boxes. Push box
upwards and remove it to the
front.
4. Release the fixing clip in the
middle of the mounting bracket by
pressing slightly on the vertical
support, then carefully push the
mounting bracket upwards and
remove it. Repeat this step for all
mounting brackets.
5. Starting from the top remove the
humidification boxes (push box
upwards and remove it sliding away
from the mounting frame.
The installation of the cleaned or the new humidification boxes/mist eliminator boxes follows
the reverse dismantling order.