Nortec MH Series User Manual
Page 24
20 | MH Series
Figure 12: Mounting Process – Step 3
Note: With close space conditions we recommend to install the EPDM sealing profile to the
vertical supports before installing the supports. Please refer to step 7 for more information.
Carefully mount the left “D” and the right vertical support “E” onto the threaded bolts of the
water tank, then fix each support with four 1/4 UNC nuts and washers (do not over tighten the
nuts).
Important: Before tightening the nuts make sure the holes of the vertical supports sit solidly on
the sheet metal of the water tub and do not get caught on the collar of the threaded bolt.