Norsat 100W ATOM - Manual (Page 17)

ATOM 100W Revision 1.1
908236
17 908236_r1.1 - Operator Manual ATOM KU
100W.doc
Command Param-Value
Pairs
Response Format
(enveloping characters not shown)
getmute None ok value
where:
= output mute value, range 0-1 (0=unit not muted; 1=unit muted)
setmute value (0|1) ok
resetfaults None ok
Table 2-3: Command Response Examples
Command Response
getident
getident ok pn AMP-Ku100 swver 1.0.9_2 sn AMP-Ku100-30230 address 7 syn no
getstatus
getstatus ok fault 0xC fwdpwr -38.7 revpwr -40.0 temp 38
getmute
getmute ok value 0
setmute
setmute value 1 ok
Resetfaults
resetfaults ok