Nevion FR202 - Manual (Page 15)

FR-2RU-20-2 Rev. A
nevion.com | 15
5
Frame operation
In order to reconfigure or expand the number of modules within a frame, the front panel
must be removed. Each module has a corresponding connector module at the rear, and is
hot swappable.
Use safety goggles when hot-swapping module cards.
If a receiver card is removed from the frame, an invisible laser beam may be
emitted inside the frame from the laser at the other end. The laser beam might
be harmful to your eyes.
5.1 Removing the front panel
Pull here Pull here
"Left circle" "Right circle"
Figure 11: Removing the front panel.