NavCom RT-3020 Rev.D User Manual
Page 14

RT-3020 User Guide - Rev. E
Data Sampling
GPS
L1
and
L2
raw data is 1 to 5Hz in the standard
configuration and as an optional upgrade as fast as 10,
25, and 50Hz via either of the two serial ports. The
PVT
(Position, Time, & Velocity)
data is also 1 to 5Hz in the
standard configuration and as an optional upgrade as
fast as 10, and 25Hz for high dynamic applications.
GPS
Performance
The NCT-2100
GPS
engine at the heart of the RT-3020
incorporates several patented innovations. The receiver
provides more than 50% signal to noise ratio advantage
over competing technologies. The benefit to the user is
improved real time positioning. Independent tests have
proven the NCT-2100 to be the best receiver when
facing various
multipath
environments.
Rugged Design
The rugged design of the RT-3020 system components
provides protection against the harsh environments
common to areas such as construction sites, offshore
vessels, and mines.
Units have been tested to conform to MIL-STD-810F for
low pressure, solar radiation, rain, humidity, salt-fog,
sand, and dust.
1-12