NavCom SF-2040 Rev.F - Manual (Page 53)

SF-2040 User Guide – Rev. F
9 81 Packed Ephemeris:
Individual satellite tracking information including:
GPS Week number of collected ephemeris, GPS
Time of week [in seconds] of collected
ephemeris, IODC, and sub-frame 1, 2, and 3
data.
9 86 Channel Status:
Receiver channel status information containing:
the GPS week, GPS Time of Week, NCT-2000 or
NCT-2100 Engine status, number of satellites
viewed/tracked, PDOP, tracked satellite identity,
satellite elevation and azimuth, C/No for the L1
and L2 signals, and correction age for each
satellite.
9 A0 Alert Text Message:
Details message receipt and processing.
9 AE Identification Block:
Details the receiver software versions (NCT-2000
or NCT-2100, and IOP) and digital serial numbers.
9 B0 Raw Measurement Data:
Raw Measurement Data Block containing: the
GPS Week, GPS Time of Week, Time Slew
Indicator, Status, Channel Status, CA
Pseudorange, L1 Phase, P1-CA Pseudorange,
P2-CA Pseudorange, and L2 Phase. This data
stream is repeated for each individual tracked
satellite.
9 B1 PVT (Position, Velocity, and Time):
Provides: GPS Week number, satellites used,
latitude, longitude, navigation mode, and DOP
information.
3
rd
Party Controller Configuration Settings
Please refer to the third party controller solution
manual/user guide if your SF-2040 GPS sensor is
part of an integrated solution.
4-51