NavCom SF-2040 Rev.F - Manual (Page 19)

SF-2040 User Guide – Rev. F
Chapter 1 .............................. Introduction
System Overview
GPS Sensor System
The SF-2040 GPS sensor
delivers unmatched accuracy
to the precise positioning community. This unique
receiver is designed to use NavCom’s StarFire™
1
network, which is a worldwide Satellite Based
Augmentation System (SBAS) for decimeter level
position accuracy (post-convergence period). The
receiver is also capable of RTK
2
, RTCM (code and
phase), and CMR/CMR+ DGPS operating methods.
The operating software is also capable of supporting
an external radio modem.
The SF-2040 integrated sensor consists of:
9 All-in-one housing incorporates compact GPS
antenna
9 24-channel, dual-frequency, precision GPS
receiver
9 2 separate SBAS channels, RTCA/DO-229D
compliant (WAAS/EGNOS/MSAS/GAGAN)
9 StarFire™ L-Band receiver 1
Refer to Table 1, later in this chapter, for the
complete list of supplied equipment.
1
Subscription Required;
2
Separate Software Option Required
1-17