Accuracy, Features, Output data rate – NavCom SF-2040 Rev.F User Manual
Page 20: Features output data rate

SF-2040 User Guide – Rev. F
Accuracy
When WAAS, EGNOS, MSAS, or GAGAN
(RTCA/DO-229D compliant) SBAS correction signals
are used, the system provides <50cm position
accuracy.
System accuracy with WAAS, EGNOS,
MSAS, or GAGAN signals is subject to the
quality and update rate of these publicly-
operated signals. Refer to Related
Standards\Publicly-Operated SBAS
Signals for contact information regarding
the organizations that implement the
RTCA/DO-229D standard.
The system provides <10cm position accuracy (post-
convergence
2
period) when StarFire™ correction
signals are used.
The system provides instant <0.5cm position
accuracy when Ultra-RTK
1
correction signals are
used (base-line, <40km, 0.5cm +1ppm). Ultra-RTK
requires GPS software version 4.2 or higher.
The system provides instant <1cm position accuracy
when RTK
1
correction signals are used (base-line,
<10km, 1cm +1ppm).
Features
Output Data Rate
The SF-2040 can output proprietary raw data at
programmable rates from <1Hz to predetermined
rates up to 50Hz
1
and Position, Velocity, and Time
(PVT) data at programmable rates from <1Hz to
predetermined rates up to 25Hz
1
through two 115kbps
RS-232 serial ports with less than 20ms latency.
<10cm horizontal and <15cm vertical StarFire™
1
Separate Software Option Required;
2
See Glossary or Web-site
1-18