MovinCool Climate Pro 18 - Manual (Page 31)

31
OPERATION (cont.)
Program Operation and Schedule
Setting Program
1. Press MENU/ESC button to go to MENU.
Note: If no button is pressed for 1 minute, LCD
displays the previous mode.
2. Use TEMP+ or -TEMP button to select
PROGRAM OPERATION and press ENTER
button to confirm.
3. Select SET under program operation feature
and press ENTER button to confirm.
4. Press ENTER button again to start program
setting. Use TEMP+ or -TEMP button to change
each value (start time ~ fan speed) and press
ENTER button to confirm. Repeat this step.
There are 10 available program slots
(P1 ~ P10). Program slots that have been set
are indicated in a square box.
Note:
• Program counts period from the start time and
day of P1 to the stop time and day of the last
program. Program period can not be overlapped.
• If MENU/ESC button is pressed during start time to fan speed setting, a
program is not completed.
Note: Follow the above steps to edit any preset program slot.
• Use FAN+ or -FAN button to scroll through the preset program slots and
access its content.
5. When setting is completed, press MENU/ESC button to exit from program
setting.
ILL00816-00
ILL00817-00
ILL00818-00