MovinCool Climate Pro 18 - Manual (Page 14)

14
INSTALLATION (cont.)
External Thermostat Connection (cont.)
External Millivolt Thermostat Connection (Optional Accessory)
(cont.)
7. Insert the millivolt thermostat wires through the hole in the rear panel.
8. Connect the millivolt thermostat wires to the terminal block according to
the connection table shown below.
9. Reinstall the service panel to the unit.
10. Refer to page 30 for activating an external thermostat on the unit’s control
panel.
Connection Table
RC
O/B
Millivolts RC
Millivolt
Thermostat
Wire No.
Unit
Terminal Block
Terminal No.
O/B
G G
Y Y
Millivolt Thermostat
Service Box
ILL00776-00
6. Squeeze the inner latches and push out the black cap from inside the panel.
ILL00046-01
Latch
Cap