MicroLinks UM02 - user manual User Manual

Page 55

Microscope Application Program http://www.ViTiny.com

圖 5-57 Setting of picture magnification

ratio display

圖 5-58 Saved ratio

 To delete and rename scale file

Choose delete or rename the file from the drop down menu, see Fig.5-59. Then

click “delete” or “rename”.

Fig.5-59 drop down menu choose file

 Semi-Auto Calibration

Set up a customized semi-auto Calibration. See Fig 5-60. “Input Measurement

Length” means the real length. For example, enter 400 means 4.00mm, enter 50

means 0.5mm. The Display Scale check-box is to decide to show the Display

Scale or not. If click the Horizontal Fixed, only a horizontal axis can draw on the

image; on the contrary, if click the Vertical fixed, only a vertical axis can draw on
the image. If choose “None”, axis can draw from any direction. A horizontal or
vertical axis can be draw by pressing „shift‟ button on your keyboard together

with clicking mouse left. After it is completed, please click “Finished” for saving

the new scale.