MicroLinks UM02 - user manual User Manual

Page 54

Microscope Application Program http://www.ViTiny.com

Figure 5-54 Setting effective horizontal dimension on monitor

When the “magnification display” is checked, as shown in Fig. 5-54, the

magnification ration will show on the upper right corner of the display window

based on display size, image resolution and preview window size. The ratio is

calculated by Field of View. Field of View is the calibrated horizontal and

vertical scale. Users could also calculate the ratio by rulers, please refer to Fig.

5-56. The displayed 1.00 mm equals to 16.2mm ruler scale, therefore, this is 16.2

times the actual size.

圖 5-55 The magnification ratio on the

upper right corner

圖 5-56 measure ratio by ruler

 Ratio displayed on the picture

Fig. 5-57 shows the options for ratio display. Choose the display way first, then

click 「

」in measurement mode to save the picture, the ratio will be saved and

shown on the upper right corner; or click 「

」to copy the preiviewed image to

previewed picture. If “monitor” is selected, the ratio displayed on the picture is

calculated by current image size and Filed of View. If “print” is selected, the ratio

is calculated by current image size, Field of View and printing resolution (the

default setting is 960dpi). If “both” is selected, both of the ratio will be displayed

as Fig. 5-58. The “S” represents screen ratio while “P” represents printing ratio.