Choose the color of aim point, Clear aim point, Video control and rotation mode – MicroLinks UM02 - user manual User Manual
Page 40
Microscope Application Program http://www.ViTiny.com
40
Copyright © 2008-2012 MicroLinks Technology Corp.
Fig.5-20 Draw Circular
5.2.5 Choose the color of aim point “
”
Click this button, will pop up choose color dialog box and from there to choose color.
5.2.6 Clear aim point “
”
To clear all aiming lines on fame
5.3 Video control and rotation mode
This toolbar has the functions to flip video image. The image will presented upside down as
well as the image moving direction when holding by different hand. By the mode, it can preview
the correct direction. The brightness, contrast and exposure tool can be adjusted and also can
cause the video image to be clearer in different scene. Fig.5-21 is the selection video control
mode. Fig.5-22 is the toolbar of video control mode.
Fig.5-21 Video control mode
Fig.5-22 Video control mode toolbar