Metz MECABLITZ 36 AF-3 User Manual
Page 78
![background image](https://www.manualsdir.com/files/798494/content/doc078.png)
5.4.1 mecablitz 36 AF-3 C/4 C
• Flash symbol
flashes:
User is requested to use or switch on the flash unit.
• Flash symbol
lights up: mecablitz is ready for operation.
Some cameras have a warning function in the viewfinder to
indicate incorrect exposure. For instance, if the f-number or
shutter speed or both of them flash in the viewfinder, then
this will indicate either under- or overexposure.
Basic information concerning incorrect exposure:
• In the event of overexposure: Do not use the flash!
• In the event of underexposure: Switch on the flash unit or
mount the camera on a tripod and set a slower shutter
speed.
The reasons for incorrect exposure can vary in the different
exposure and automatic programmes.
5.4.2 mecablitz 36 AF-3 M
• Flash symbol
lights up (Flash readiness indication):
Display is permanently illuminated or flashes slowly to
indicate that the mecablitz is ready for firing. A flash will
be fired when the camera’s shutter is released.
• Flash symbol
flashes (Correct exposure indication):
Display flashes rapidly after shooting to confirm correct
exposure.
• Display
flashes:
Flash is required for the existing exposure situation.
5.4.3 mecablitz 36 AF-3 N
• Green flash symbol
illuminated:
User is requested to use or switch on the flash unit.
• Red flash symbol
illuminated:
Flash unit is ready for firing.
• Red flash symbol
remains illuminated after shooting or
is briefly switched off:
78
ķ
705 47 0076.A2 36 AF3-4 13.07.2006 15:10 Uhr Seite 78