Metz MECABLITZ 36 AF-3 - Manual (Page 71)

• Never disassemble the flashgun! DANGER: HIGH VOLT-
AGE! There are no components inside the flashgun that
can be repaired by a layman.
• When taking a series of flash shots at full light output and
fast recycling times as provided by NiCad battery opera-
tion, make sure to observe an interval of at least 10 mi-
nutes after 15 flashes, otherwise the flash unit will be
overloaded.
• The mecablitz may only be used in combination with a
camera-integrated flash unit if the latter can completely
be folded out!
• Quick changes in temperature may cause condensation.
Therefore give the flashgun time to acclimatize!
2. Supported dedicated functions
2.1 mecablitz 36 AF-3 C
• Flash ready indication in camera viewfinder
• Automatic flash sync speed
• TTL flash control
∆ Manual TTL-flash exposure correction
x AF measuring beam control
• Programmed auto flash mode
∆ = Dedicated function is performed by the camera or must be
set on the camera.
x = Some cameras only support the AF illuminator integrated
in the camera.
71
ķ
705 47 0076.A2 36 AF3-4 13.07.2006 15:10 Uhr Seite 71