Metz MECABLITZ 36 AF-3 - Manual (Page 74)

3.2 Removing the mecablitz from the camera
Turn off the camera and the mecablitz by their main
switch.
mecablitz 36 AF-3 C/4 C and 36 AF-3 N
• Turn the knurled nut against the mecablitz housing until
the stop point is reached.
• Withdraw the mecablitz from the camera’s accessory
shoe.
mecablitz 36 AF-3 M
• Press the unlatching button “PUSH” towards the flash unit
and at the same time hold it lightly down until the “PUSH”
button locks in place.
• Withdraw the mecablitz from the camera’s accessory
shoe.
4. Power supply
4.1 Suitable batteries
The mecablitz can be operated with any of the following
batteries:
• 4 NiCad batteries, type IEC KR 15/51. They permit very
fast recycling and are economical in use because they are
rechargeable.
• 4 nickel metal hydride batteries. They have a significantly
higher capacity than NiCad batteries and are less harm-
ful to the environment (no cadmium).
• 4 alkaline manganese dry-cell batteries, type IEC LR6.
Maintenance-free power source for moderate power re-
quirements.
Do not use lithium batteries! Their higher cell voltage
may damage the electronic system of the flash unit.
Remove the batteries from the mecablitz if the flash unit is
not going to be used for an extended period of time.
☞
☞
74
ķ
705 47 0076.A2 36 AF3-4 13.07.2006 15:10 Uhr Seite 74