Metz MECABLITZ 36 AF-3 - Manual (Page 73)

2.4 mecablitz 36 AF-3 N
• Flash ready indication in camera viewfinder
• Automatic flash sync speed
• TTL flash control
• Automatic TTL flash exposure correction
∆ Manual TTL-flash exposure correction
∆ Matrix controlled TTL fill-in flash mode
• AF measuring beam control
• Programmed auto flash mode
∆ 1st or 2nd curtain synchronisation
∆ = Dedicated function is performed by the camera or must be
set on the camera.
x = Some cameras only support the AF illuminator integrated
in the camera.
3. Mounting the mecablitz
3.1 Mounting the mecablitz on the camera
Turn off the camera and the mecablitz by their main
switch.
mecablitz 36 AF-3 C/4 C and 36 AF-3 N
• Turn the knurled nut against the mecablitz housing until
the stop point is reached.
• Slide the mecablitz foot completely into the camera’s
accessory shoe.
• Turn the knurled nut against the camera body as far as
possible, thereby clamping the mecablitz.
mecablitz 36 AF-3 M
• Slide the mecablitz foot completely into the camera’s
accessory shoe.
• Lightly press the unlatching button “PUSH” upward to
clamp the mecablitz in the camera’s accessory shoe.
☞
73
ķ
705 47 0076.A2 36 AF3-4 13.07.2006 15:10 Uhr Seite 73