Metz MECABLITZ 64 AF-1 digital Olympus - Manual (Page 173)

Setting procedure for the learn function
The AF pre-flash function of the camera must
be switched off.
• Press the sensor buttons on the
touch display as many times as it takes for
the selection to appear.
• Press the sensor button on the touch
display.
• "Learning Mode" is ready to learn.
• Press the release button on the camera so
that the camera’s own flash unit is
activated.
If the SERVO flash unit has received a light
pulse, then "LEARN OK" appears in the
display as confirmation.
The macablitz digital has learned the flash of
the camera flash unit.
SYNC
Learn
10.4.5 Switching-off SERVO flash mode
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select the desired mode
of operation, e.g
.
• Press the sensor button on the touch
display for the mode of operation, e.g .
The selected mode of operation is adopted.
TTL
TTL
173
M-
Zoom 24
M-Servo
SYNC
i
P
1/16
m
m
SYNC
O
LEARN
M-
Zoom 24
M-Servo
SYNC
i
P
1/16
m
m
MODE
O
q p
TTL
A
0.6- 7.5 m
F
5,6
M-
Zoom 24 m
m
TTL
i
EV
k