Parameter o, Zoom o, Zoom – Metz MECABLITZ 64 AF-1 digital Olympus User Manual

Page 166

166

Example:

You use a zoom lens with a focal length range
of 35 mm to 105 mm. In this case, you set
the position of the reflector of the flash unit
to 35 mm.

Resetting to auto-zoom

• Touch the shutter release to begin a data

transfer between the flash unit and the
camera.

• Press the

ቨ button as often as it takes

for the selection menu to appear.

• Press the

sensor button on the

touch display.

• Press the

sensor buttons on the

touch display and select

• Press the

sensor button on the

touch display.

• Press the

sensor buttons on the touch

display and select

• Press the

sensor button on the

touch display.

After around 10 seconds, the operation
display appears, or press the

ቨ button

repeatedly until the operation display
appears.

PARAMETER

ZOOM

AUTOZOOM

Setting procedure

• Press the

ቨ button as often as it takes

for the selection menu to appear.

• Press the

sensor button on the

touch display.

• Press the

sensor buttons on the

touch display and select

• Press the

sensor button on the

touch display.

• Press the

sensor buttons on the

touch display and select the desired zoom
value.

• Press the sensor button on the touch

display for the desired zoom value
The setting will take effect immediately.

The following zoom positions are possible for
the reflector: 24 - 28 - 35 - 50 - 70 - 85 - 105-
135-180-200 mm (35 mm format).

Tip:

If you do not necessarily need the full guide
number and maximum flash range of the
flash unit, you can leave the zoom reflector at
the position for the shortest focal length of
the zoom lens.

This will provide full light coverage of the pic-
ture and eliminate the need to continually
adjust it to the focal length of the lens.

PARAMETER

ZOOM

PARAMETER

P/EV

ZOOM

105

PARAMETER

P/EV

ZOOM

AUTOZOOM