Metz MECABLITZ 64 AF-1 digital Olympus - Manual (Page 149)

• Rapid changes in temperature may lead to
condensation. If this occurs, allow time for
the unit to become acclimatized!
• When you activate the flash, there should
be no opaque material directly in front of or
on the reflector cover (flash window). The
intense energy emissions can otherwise
lead to scorching or spotting of the material
and/or the reflector cover.
• After a series of flashes with full power and
short intervals, a pause of at least 3 minu-
tes must be observed after each series of
20 flashes! !
• When taking a series of flash shots at full
light output and with rapid recycling times,
and with zoom positions of 35 mm and
less, the diffuser heats up, due to the high
level of thermal energy.
• This flash unit may be used in combination
with a camera-integrated flash only if the
flash can be folded out completely.
2 Dedicated flash functions
Dedicated flash functions are flash functions
that have been specially adapted to a given
camera system. Depending on the type of
camera, different flash functions are supported.
• Flash-ready indication in camera viewfin-
der/camera display.
• Automatic flash sync speed control.
• Automatic flash sync speed control.
• TTL flash mode .
• Manual flash exposure correction for TTL.
• FourThirds/Micro-FourThirds-System
compatible
• 1st or 2nd curtain synchronisation
(SLOW2).
(Camera setting)
• Automatic FP short sync for TTL and M.
• Automatic motor zoom control.
• Extended zoom mode.
• AF measuring beam control.
• Automatic flash range indication.
• Programmed auto flash mode.
• Preflash for red-eye reduction
• Wireless TTL remote flash mode.
• Servo mode.
• Spot zoom mode.
• Wake-up function for the flash unit.
149
k