Metz MECABLITZ 64 AF-1 digital Olympus - Manual (Page 171)

10.4 SERVO mode
SERVO mode is a simple slave mode without
or with complete pre-flash suppression in
which the slave flash unit always triggers a
flash as soon as the camera flash unit recei-
ves a light pulse.
In SERVO mode, only manual flash mode is
possible. Manual flash mode is automatically
activated after switching to SERVO mode.
10.4.1 Setting SERVO flash mode
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
selecting the mode of operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the
touch display.
The mode of operation is adopted.
If desired, partial light output can be set,
see 10.4.3.
SERVO
SERVO
10.4.2 Pre-flash suppression or
synchronisation settings
• Press the sensor button on the touch
display as many times as it takes for the
display for selecting the type of synchroni-
sation.
• Press the sensor button on the touch
display:
synchronisation without pre-flash
synchronisation with pre-flash
The synchronisation of operation is adop-
ted.
If the synchronisation set here does not work
properly, then proceed as described in
10.4.4.
SYNC
171
0.8- 9.0 m
F
5,6
M-
Zoom 35 m
m
TTL
i
EV
MODE
O
q p
REMOTE SLAVE
SERVO
M-
Zoom 24
M-Servo
SYNC
i
P
1/1
m
m
SYNC
O
LEARN
M-
Zoom 24
M-Servo
SYNC
i
P
1/1
m
m
k