Metz MECABLITZ 64 AF-1 digital Canon - Manual (Page 208)

18 Technical data
Max. guide numbers at ISO 100/21°,
zoom 200 mm:
In the metric system: 64
In the imperial system: 210
Flash modes:
ETTL automatic A, strobe flash mode, manual M, Remote slave flash
mode, Servo mode.
automatic aperture setting at ISO 100/21°:
F1.4 to F64, including intermediate values
Manual partial light output levels:
P1/1 . . . P1/ 256 in one-third increments.
P1/1 . . . P1/256 light output, in automatic high-speed synchronisation
(HSS)
Flash durations: see table 2, page (Page 317)
Colour temperature: Ca. 5600 K
Sensitivity to light: ISO 6 to ISO 51200
Synchronisation:
low-voltage ignition
Synchronisation:
Low-voltage ignition
Number of flashes at full light output
• 140 when operating with alkaline-manganese dry cell batteries
(1,5V)
• 190 when operating with nickel-metal-hydride batteries (1,2V /
2100 mAh)
• 290 when operating with lithium batteries (1,5V)
• 360 when operating with external power supply with Metz Power
Pack P76
Recycling times in Sek. (min./max.)
• 0,1/4,4 when operating with alkaline-manganese dry cell batteries
(1,5V)
• 0,1/1,8 when operating with nickel-metal-hydride batteries
(1,2V / 2100 mAh)
• 0,1/4,2 when operating with lithium batteries (1,5V)
• 0,1/1,6 when operating with external power supply with Metz
Power Pack P76
Light coverage:
Reflector from 24 mm (35 mm format)
Reflector with wide-angle diffuser from 12 mm (35 mm format)
Swivelling ranges and locking positions of the reflector:
upwards: -9° 45° 60° 75° 90°
counter-clockwise:
60° 90° 120° 150° 180°
clockwise:
60° 90° 120°
Dimensions, approx., in mm (W x H x D):
Ca. 78 x 148 x 112
Weight :
Flash unit without batteries approx. 422 g
Included:
Flash unit with integrated wide-angle diffuser, operating instructi-
ons, Flash unit mounting foot S60, Belt pouch T64, operating
instructions.
208
k