Metz MECABLITZ 64 AF-1 digital Canon - Manual (Page 183)

10.1.2 Setting the flash mode on the master
flash unit
• Press sensor button on the touch
display for the flash mode until the selecti-
on for the master flash unit appears.
• Press the sensor button on the
touch display.
• Press the sensor button for or
flash mode on the touch display. The set
mode of operation is adopted immediately.
10.1.3 Setting the exposure correction (EV)
in ETTL mode on the master flash unit
• Press the sensor button on the
touch display for the master mode as many
times as it takes for the master selection to
appear.
• Press the sensor button on the touch
display.
EV
MODE
M E TTL
ETTL
E TTL
• Press the sensor buttons on the
touch display and set the desired exposure
correction (e.g. 1).
• Press the sensor button for the desired
exposure correction value .
The setting is adopted immediately.
10.1.4 Lighting conditions (RATIO) for the
flash groups settings on the master
flash unit
The lighting conditions of the flash groups (A,
B, C) can be set proportionally in order to
obtain specific lighting effects. The lighting
conditions for all groups are controlled exclu-
sively via the master flash unit.
• Press the
ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor button on the
touch display.
• Press the desired sensor button on the
touch display:
all three groups are the same (RATIO Off).
Ratio of group A to group B.
Ratio of group A to group B plus an
exposure correction (EV) for group C.
The setting is adopted immediately.
A : B
A : BIC
D
PARA
RATIO
A+B+C
1
183
RATIO OFF
REMOTE
MASTER
OFF
ETTL
i A+B+C
MODE
O
M
OFF
ETTL
RATIO OFF
REMOTE
MASTER
ETTL
i A+B+C
MASTER
O
MODE
EV
EV
O
q p
2/3
1
1 1/3
PARAMETER
ZOOM
CHANNEL
RATIO
RATIO
A + B +C
A : B I C
A : B
O
O
PARAMETER
k