Metz MECABLITZ 64 AF-1 digital Canon User Manual
Page 185
10.1.5 Partial light output (M) in M-mode
settings on the master flash unit
Set the mode to
as described in 10.1.2.
• Press the
sensor buttons on the touch
display as many times as it takes for the
partial light output setting to appear.
• Press the sensor button on the touch
display for which a partial light output is to
be set (in the example, a partial light out-
put of 1/16 is to be set for slave group A).
• Press the
sensor buttons on the
touch display to set the desired partial light
output.
• Press the sensor button of the selected par-
tial light output
on the touch display.
The setting is adopted automatically.
1/16
M
A:B:C
10.1.6 Remote channel settings
There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
• Press the
ቨ button as often as it takes
for the selection menu to appear.
• Press the
sensor button on the
touch display.
• Press the
sensor button on the
touch display.
• Press the
sensor buttons on the
touch display and select a remote channel,
e.g .
• Press the sensor button on the touch
display for the desired channel.
The setting will take effect immediately.
The channel setting, CH2 in the example,
can be checked by pressing sensor button
ቦ .
CHANNEL
CHANNEL 2
i
D
PARAMETER
185
A
u
M
I
1/1
B
u
M
I
1/1
C
u
M
I
1/1
REMOTE
MASTER
M
1/1
i
A
:
B
:
C
A
u
M
I
1/1
B
u
M
I
1/1
C
u
M
I
1/16
REMOTE
MASTER
M
1/1
i
A
:
B
:
C
EV
O
q
p
1/8-2/3
1/16
1/16- 1/3
P
P
1/1
A
u
M
P
1/1
B
u
M
C
u
M
O
P
1/1
PARAMETER
PARAMETER
O
ZOOM
RATIO
CHANNEL
CHANNEL
O
q
p
CHANNEL 1
CHANNEL 2
CHANNEL 3
k