Metz MECABLITZ 64 AF-1 digital Canon - Manual (Page 184)

10.1.4.1 Lighting conditions for flash groups
A + B settings on the master flash
unit
• If lighting conditions are to be set for slave
flash group A+B, then press sensor button
on the touch display until the selecti-
on of ratio settings appears.
• Press the or sensor buttons on the
touch display and set the lighting conditi-
ons (e.g. 1: 4) for the slave flash groups.
The selected setting is adopted.
4 B A 3
A : B
10.1.4.2 Exposure correction (EV) for flash
group C settings on the master
flash unit
Set the lighting conditions to as descri-
bed in 10.1.4.
• If an exposure correction value (EV) is to be
set for slave flash group C, then press sen-
sor button
on the touch display.
• Press the sensor button on the touch
display.
• Use the sensor buttons to set an
exposure correction value (EV) (e.g. 2/3).
• Press the sensor button on the touch
display.
The setting is adopted immediately.
Slave flash group C is usually required to illu-
minate the background in order to prevent
shadows from forming.
2/3
A:BIC
A:BIC
184
EV
O
q p
1/3
2/3
1
A : B
1 : 1
REMOTE
MASTER
ETTL
i A : B
A : B
1 : 4
REMOTE
MASTER
ETTL
i
A : B
1 : 1
REMOTE
MASTER
ETTL
A Ĩ Ī B
A : B
A : B C
1 : 4
REMOTE
MASTER
ETTL
i A : B I C
A : B C
1 : 4 2/3
REMOTE
MASTER
ETTL
i A : B I C
RATIO/EV
1 : 4 A : B u
C u
O
k