Metro U-SERIES hot AND COLD food holding cabinets - Manual (Page 4)

4
Fixed Lip Load Slide Configurations
Wire Shelf Installation
CARE AND MAINTENANCE
Before proceeding with any maintenance activity strictly follow “Safety Information” on page 2 of this
manual.
Cleaning The Cabinet
To clean the cabinet, wipe with a damp cloth and dry with a towel. Use only cleaning agents
approved for stainless steel.
Do not use cleaners with chlorides or phosphates as they may cause damage to stainless steel.
1. Use cleaners in the proper concentrations. Follow the manufacturer’s directions for the cleaning product used. After
using any cleaning products, thoroughly rinse all surfaces to remove residue.
2. Use a damp cloth or sponge. Mild soap suitable for stainless steel is acceptable. Dry with a clean towel. Wipe up
spills as soon as possible and regularly clean the cabinet to avoid staining and difficult to clean conditions.
Cabinet Maintenance-All Models
C5 U-Series cabinets have been designed to require very little maintenance. With normal use, cleaning is the only form
of maintenance that need to be done on a regular basis. Keeping the casters free of dirt build-up will go a long way in
prolonging their life.
Regularly inspect the casters. Tighten loose fasteners and replace worn or damaged parts with new
InterMetro approved parts. Replace worn or damaged casters immediately; lubricate casters regularly
(if applicable).
FULL HEIGHT CABINET
Part No. RPC5-L9
HALF HEIGHT CABINET
Part No. RPC5-L5
Insert left side of wire shelf into upright at
an angle and then lower right side to level
and shift shelf to fit into right side upright.
Wire
Shelf
1 2 3 NOTE: Wire shelf must be used with cabinet
uprights