Metro U-SERIES hot AND COLD food holding cabinets User Manual
Page 2
2
TAbLE OF CONTENTS
SAFETY INFORMATION .................................................................................................................................................................................................... 2
IDENTIFY YOUR CABINET ................................................................................................................................................................................................ 2
PRODUCT FEATURES ...................................................................................................................................................................................................... 2
INSTALLATION AND SETUP ............................................................................................................................................................................................. 3
CARE AND MAINTENANCE .............................................................................................................................................................................................. 4
REPLACEMENT PARTS ..................................................................................................................................................................................................... 5
WARRANTY ....................................................................................................................................................................................................................... 6
SAFETY INFORMATION
This cabinet is only for hot and cold food holding applications.
Follow all food safety guidelines. Food must be at the appropriate temperature before
being placed into cabinet. Use a food probe to check internal food temperature - the
cabinet temperature is not necessarily the internal food temperature.
IDENTIFYINg YOUR CAbINET
®
MODEL NO.
®
INTERMETRO INDUSTRIES CORP., WILKES-BARRE, PA 18705
WWW.METRO.COM
C5UX-XXX
PRODUCTION DATE.
XXXX
Made in USA
For future reference, note the serial and model number found on the data plate of the cabinet here:
Model number ________________________________
Date the cabinet was put into service _______________________________
Fill out and return the warranty card located at the back of this manual.
PART NUMbERINg
C5 U 9 - S U
__ _ _
_ _ A
_
PRODUCT FEATURES
HEIGHT
9 = FULL
5 = HALF
CABINET NAME
SERIES
U = INSULATED NON POWERED
MATERIAL
S = STAINLESS STEEL
N = ALUMINIUM
SLIDES
U = UNIVERSAL WIRE SHELF
F = FIXED LIP LOAD
ACCESSORIES
Handle
Slides
Door
Door
Latch
Info Panel
(Optional)
Rear Push Handle
(Optional, Not on
1
/
2
Height Cabinets)
Perimeter Bumper
(Optional)
(2) Brake Caster
— Front
(2) Swivel Caster
— Rear
HALF HEIGHT
CABINET