Metro Mobile Computing Workstations MPS-3111 Series Sealed Lead Acid Power Supply - Manual (Page 24)

24 Metro TM MPS-3111 Series SLA Power Supply Operations Manual Supplement
InterMetro Industries Corporation
Maintenance and Storage
Cleaning
Use Metro Cleaner (foaming aerosol available from InterMetro Customer
Service), or an equivalent mild hospital disinfectant, to clean the exposed
surfaces of the workstation on a regular basis. Metro Cleaner is
compatible with all of the components of the Metro
TM Series Mobile
Computing Workstation.
• Dampen a soft cloth with Metro Cleaner or equivalent cleaner
• Wipe surfaces until clean
• Do not spray Metro Cleaner into any openings (like air vents or fan
on power supply, etc.) of the Power Supply.
• Do not use Metro Cleaner for medical devices used for patient
contact (EKG contacts, etc.).
Use a vacuum cleaner to directly remove dust buildup around the fan
intake. Hold the vacuum nozzle at the fan intake to PULL dust out of the
unit rather than blowing dust into the unit.
• When replacing the battery (see “SLA Battery Replacement”
below), Use a vacuum cleaner to remove any dust or debris
buildup inside the power supply around the SLA battery and power
electronics.
Fuse Replacement
Caution:
For continued protection against risk of fire, replace only with the same type
and rating of fuse
AC input:
DC output:
Battery input: 2x F 6.3 A 250 V (Fast acting 6.3 A 250 V fuse 5 x 20 mm)
F 10 A 250 V (Fast acting 10 A 250 V fuse 5 x 20 mm)
F 10 A 250 V (Fast acting 10 A 250 V fuse 5 x 20 mm)
Location of DC Output and Battery Input Fuses