Connecting the board for i/o operations, Connectors, cables – main i/o connector, Pinout – main i/o connector – Measurement Computing PCI-CTR20HD User Manual
Page 11: Connecting the board for i/o operations -3, Connectors, cables – main i/o connector -3, Pinout – main i/o connector -3
PCI-CTR20HD User's Guide
Installing the PCI-CTR20HD
Connecting the board for I/O operations
Connectors, cables – main I/O connector
Table 2-1. Board connectors, cables, and accessory equipment
lists the board connectors, applicable cables, and compatible accessory products for the PCI-
CTR20HD.
Connector type
J1: 100 pin high density unshielded
Compatible cables (optional)
C100FF-x, unshielded ribbon cable (Figure 2-2).
x = length in feet
Compatible accessory products (optional)
CIO-MINI50 or CIO-MINI50/DST
CIO-TERM100 or CIO-TERM100/DST
CIO-SPADE50
SCB-50
Pinout – main I/O connector
The PCI-CTR20HD board's main I/O connector is a 100-pin high density connector labeled
J1
on the board.
Pins 1-50 provide connections for counters A and B. Pins 51-100 provide connections for counters C and D.
The pin names for the I/O connector are defined in Error! Reference source not found..
2-3