Measurement Computing CIO-DAC04/12 - Manual (Page 6)

2.3 OUTPUT RANGE SELECTION
The analog output full-scale ranges are set by DIP switches. Each analog channel has a separate set of switches. The location of the
switches and the channels they control are shown in the Figures 2-2.
CIO-DAC04/12-HS
Figure 2-2. CIO-DAC04/12-HS Switch Locations
Table 2-1 CIO-DAC04/12-HS Range Switch Settings
OFF ON OFF OFF 0 to 2.5V
ON OFF OFF OFF 0 to 5V
OFF OFF OFF OFF 0 to 10V
OFF ON ON ON +/-2.5V
ON OFF ON ON +/-5V
OFF OFF ON ON +/-10V
S4 S3 S2 S1 OUTPUT FULL - SCALE RANGE
NOTE: UP = ON, DOWN = OFF
-2-