Measurement Computing USB-3101FS - Manual (Page 17)

Declaration of Conformity
Manufacturer: Measurement Computing Corporation
Address: 10 Commerce Way
Suite 1008
Norton, MA 02766
USA
Measurement Computing Corporation declares under sole responsibility that the product
USB-3101FS
to which this declaration relates is in conformity with the relevant provisions of the following standards or other
documents:
Category: Electrical equipment for measurement, control and laboratory use.
EC EMC Directive 2004/108/EC: General Requirements, EN 61326-1:2006 (IEC 61326-1:2005).
Emissions: IEC 61326-2-1:2005.
 EN 55011 (1990)/CISPR 11 Radiated emissions: Group 1, Class A
 EN 55011 (1990)/CISPR 11 Conducted emissions: Group 1, Class A
Immunity: EN 61326-1:2006, Table 3.
 IEC 61000-4-2 (1995): Electrostatic Discharge immunity, Criteria B.
 IEC 61000-4-3 (1995): Radiated Electromagnetic Field immunity, Criteria A.
To maintain compliance to the standards of this declaration, the following conditions must be met.
 The host computer, peripheral equipment, power sources, and expansion hardware must be CE
compliant.
 All I/O cables must be shielded, with the shields connected to ground.
 I/O cables must be less than 3 meters (9.75 feet) in length.
 The host computer must be properly grounded.
 Equipment must be operated in a controlled electromagnetic environment as defined by Standards EN
61326:2006, or IEC 61326:2005.
Declaration of Conformity based on tests conducted by Chomerics Test Services, Woburn, MA 01801, USA in
September, 2008. Test records are outlined in Chomerics Test Report #EMI5135.08.
We hereby declare that the equipment specified conforms to the above Directives and Standards.
Carl Haapaoja, Director of Quality Assurance