Directed Electronics 1401 - Manual (Page 20)

12 © 2011 Directed Electronics. All rights reserved.
Using the system
➢
Locking the vehicle
To lock the vehicle, press the
A U X
button on the remote control.
The horn (if connected) in the vehicle honks one-time, and the parking lights
flash one-time. If the power door locks are connected, the doors lock and the
optional Failsafe Starter Kill activates. The system automatically checks for
errors when it locks.
If errors are found when locking:
If the door is open when you lock the vehicle, the horn honks once and the
parking lights flash. The horn then honks a second time if a door is open, and
the Control Center LED flashes in groups of three.
Note: The optional horn honk and door input must be enabled for this feature
to work.
Locking without the honk (Silent Lock)
Press the A U X
button on the remote one-time, and then press the
A U X
button. The
vehicle locks without the confirmation honk. The parking lights flash one-time.
➢
Unlocking the vehicle
Press the
A U X
button one time. The vehicle horn honks two-times and the park-
ing lights flash. If the power door locks are connected, the doors unlock and
the optional Failsafe Starter Kill deactivates.
Unlocking without the honk (Silent Unlock)
Press the A U X
button on the remote one-time, and then press the
A U X
button. The
vehicle unlocks without the confirmation honk. The parking lights flash two-
times.
Note: The optional horn honk and door input must be enabled for this feature
to work.