Directed Electronics 1401 - Manual (Page 11)

3 © 2011 Directed Electronics. All rights reserved.
Two car operation
You can use the remote control system for two cars, with full command capabil-
ity for both vehicles.
To change the car selection:
•
Press and hold the
A U X
button for 3 seconds until the amber LED blinks
once or twice indicating the current vehicle:
One blink: Car 1
Two blinks: Car 2
• To scroll from one car to the other, press the
A U X
button again. After select-
ing the car, operation resumes. The selected car remains selected until the
setting is changed.
Note: Car 2 mode must be programmed On. See Configuring your remote.