MEGA Corp. MSC-OPS-1 - Manual (Page 61)

MSC/MST-OPS-1
31 Dec 2013
SECTION 7
Appendix
7-18
MSC/MST-OPS(CL)-1
31 Dec 2013
TO REACTIVATE UNIT:
1. Lubricate water pump bearings as instructed in
the Maintenance (-2) technical manual.
2. Inspect tank interior to ensure it is clean, if the
tank is coated, ensure coating integrity, clean or
repair as required.
3. Install sump cover with new gasket.
4. Close all drain valves and petcocks.
5. Start engine.
6. Control SYSTEM/POWER Switch – ON
7. Individual Spray Head Switches – OFF
8. DUMP BAR Switch – OFF
9. DRAIN Switch – OFF
10. MONITOR/BFV Switch – OFF
11. Turn engine off.
12. Cab Control SYSTEM/POWER Switch – OFF
N-17