MEGA Corp. MSC-OPS-1 - Manual (Page 52)

MSC/MST-OPS-1
31 Dec 2013
SECTION 7
Appendix
7-9
MSC/MST-OPS(CL)-1
31 Dec 2013
WATER CANNON
1. Cab Control SYSTEM/POWER Switch – ON
2. PUMP Switch ON
Engaging/disengaging the water pump above
LOW IDLE may result in water pump component
damage and reduced service life.
3. Water Cannon – Pointed in a safe direction.
4. MONITOR/BFV Switch – ON
5. Water Cannon Joystick – As Required.
6. MONITOR/BFV Switch – OFF
Once operations are complete:
7. Water Cannon Nozzle - STOW
Manual and remote adjustable nozzles must be
stowed pointing vertically to reduce wear on
water cannon joints. Leaving the nozzle in any
other position will cause increased wear on water
cannon joints and result in premature joint
failure.
N-8