MEGA Corp. MMP4-1 - Manual (Page 17)

MMP4(T2)-OPS-1
4 Oct 2011
SECTION 3
System Operation
3-3
11. Remove the center travel lock bolt and
safety chain from the center upright on the
frame.
12. Remove the forward travel lock bolt near
the discharge boom hinge.
13. Locate 2 flange retaining bolts (typically
placed inside of the battery box), locate 2
wrenches to tighten the flange bolts.
14. Using the rope, swing the discharge boom
to align the flanges.
15. Insert 2 flange bolts in the holes of the
flange, install nuts to the bolts.
15. Tighten the flange retaining bolts until the
flanges are parallel and secure.
16. Remove the guide rope from the discharge
boom.
Travel Lock Bolt
Travel Lock Bolt
Safety Chain
Safety Chain
Forward Travel Lock Bolt