Digital Networks North America DNswitch 800 - Manual (Page 43)

DNswitch 800 Configuring and Monitoring the Switch 33
VLAN Static List
Use this screen to create or remove VLAN groups.
Figure 3-25. VLAN Static List
VLAN Static Table
Use this screen to modify the settings for an existing VLAN. You can add/
delete port members for a VLAN, disable or enable VLAN tagging for any
port, or prevent a port from being automatically added to a VLAN via the
GVRP protocol. (Note that VLAN1 is fixed as an untagged VLAN
containing all ports on the switch, and cannot be modified via this screen.)
Figure 3-26. VLAN Static Table - Add/Modify VLAN
Parameter Description
Current Lists all the current VLAN groups created for this system. Up to
256 VLAN groups can be defined. To allow this switch to
participate in external VLAN groups, you must use the VLAN ID
for the concerned external groups.
New Allows you to specify the name and numeric identifier for a new
VLAN group. (The VLAN name is only used for management on
this system; it is not added to the VLAN tag.)
Status Enables/disables the specified VLAN.
Add Adds a new VLAN group to the current list.
Remove Removes a VLAN group from the current list. If any port is
assigned to this group as untagged, it will be reassigned to
VLAN group 1 as untagged.
Parameter Description
VLAN The ID for the VLAN currently displayed.
Range: 1-2048
Name A user-specified symbolic name for this VLAN.
String length: 8 alphanumeric characters
Status Enables/disables the specified VLAN.