Digital Networks North America DNswitch 800 - Manual (Page 24)

14 Configuring and Monitoring the Switch DNswitch 800
Trap Managers
The following figure and table describe how to specify management
stations that will receive authentication failure messages or other trap
messages from the switch. Up to 5 trap managers may be entered.
Figure 3-6. Trap Managers
Parameter Description
Trap Manager Capability Up to 5 trap managers may be used.
Trap Manager IP Address IP address of the trap manager.
Trap Manager Community
String A community authorized to receive trap messages.
Add/Remove Add/remove strings from the active list.
Enable Authentication
Traps Issues a trap message to specified IP trap managers
whenever authentication of an SNMP request fails.
Default: enabled