Digital Networks North America DNswitch 800 - Manual (Page 29)

DNswitch 800 Configuring and Monitoring the Switch 19
Address Table Configuration
The Address Table contains the unicast MAC addresses and VLAN
identifier associated with each port (that is, the source port associated
with the address and VLAN), sorted by MAC address or VLAN. You can
also clear the entire address table, or information associated with a
specific address; or set the aging time for deleting inactive entries. The
information displayed in the Address Table is indicated in the following
figure and table.
Figure 3-12. Address Table
Parameter Description
Aging Time Time-out period in seconds for aging out dynamically learned
forwarding information.
Range: 10 - 415 secs; default: 300 secs.
Dynamic Address
Counts The number of dynamically learned addresses currently in the
table.
Static Address
Counts The number of static addresses currently in the table.
Address Table All entries, sorted by address or VLAN ID.
Address Table Sort
Key The system displays the MAC address of each node and port
whose address table includes this MAC address, the
associated VLAN(s), and the address status (i.e., dynamic or
static).
New Static Address Use these fields to add or remove a static entry to the address
table. Indicate the address, port and VLAN group when adding
a new entry.
Add/Remove Adds/removes selected address.
Clear Table Removes all addresses from the address table.