Digital Networks North America DNswitch 800 - Manual (Page 33)

DNswitch 800 Configuring and Monitoring the Switch 23
Spanning Tree Configuration
The following figures and tables describe Bridge STA configuration.
Switch
Figure 3-15. STA Configuration - Switch
Designated Bridge The priority and MAC address of the device through which this
port must communicate to reach the root of the spanning tree.
Designated Port The priority and number of the port on the designated bridging
device through which this switch must communicate with the
root of the spanning tree.
Parameter Default Description
Usage Enabled Enable this parameter to participate in an STA-
compliant network.
Priority 32,768 Device priority is used in selecting the root device,
root port, and designated port. The device with
the highest priority becomes the STA root device.
(Remember that the lower the numeric value, the
higher the priority.) However, if all devices have
the same priority, the device with the lowest MAC
address will then become the root device.
Range: 0 - 65535
Parameter Description