beautypg.com

Installation, Places to go from the installation screen, Things to do in the installation screen – DirecTV HIRD-D11 User Manual

Page 64: System test, Transponder, Position, New card

background image

DIRECTV SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER’S MANUAL

P

AGE

7-14

Installation

The INSTALLATION screen provides the utilities that makes the setup and testing of your system
simple and convenient.

Places to go from the INSTALLATION screen

System Test

The System Test button takes you to the SYSTEM TEST screen.

Things to do in the INSTALLATION screen

Here, the quality of the satellite signal is automatically displayed. In addition to using this at
installation time, you can use it to troubleshoot if you experience loss of signal, momentary video
freezing, or similar problems.

Transponder #

You may want to try different transponders troubleshoot satellite signal reception problems. Each
transponder transmits multiple programs at a time. The transponder shown when the screen first
displays represents the one associated with the last viewed program. By moving the highlight to the
transponder area, you can enter a number from 01 to 32. Different transponders may show varying
signal strengths. This is normal unless the variations are extreme (such as 40 and 90). In the event of
signal reception problems, customer service representatives may ask for signal strength on a different
transponder. Do not change transponders trying to find the best signal since the transponder will
automatically change depending on the channel you want to view.

Another signal strength utility that you may find useful is the Cable Test that can be found in the
SYSTEM TEST screen.

Position

After selecting Position from the INSTALLATION screen a pop-up menu called Alignment Mode
will appear. You can enter your location by either Align by ZIP or Align by LAT/LONG. After making
your selection, the appropriate pop-up entry panel will appear. Use the and keys or use the
numeric keypad to change the value of the digits. Press the key to advance or the key to back up.
Once you have entered all of the correct digits, select OK. The calculated results on the proper
direction to point your satellite dish antenna will be displayed.

New Card

The NEW CARD screen provides a way for service providers to distribute new access cards. Should
you be issued a new card, you will need to activate it. Follow the on-screen instructions carefully to

The INSTALLATION screen

This manual is related to the following products: