Mathey Dearman Band Machine - Manual (Page 8)

8
5.0 – SET-UP AND OPERATION
5.1 Installation of Stainless Steel Band on Pipe
Figure 2
Table 3 – Band Parts List
Note 1: All Bands sizes are slightly different, contact Mathey Dearman, Inc. for parts information.
Note 2: Locating Pins and Upper or Lower Duckbills is an integral part of the Band and are not field-
replaceable. The Band must be returned to Mathey Dearman Inc. for replacement of these parts.
Note 3: Quantities vary with band size.
Item No. Part Description Part No. Qty. Req’d
1 Stainless Steel Band Material See Note 1 1
2 Locating Pins 05.0103.003 See Note 2
3 Anchor Block 05-0103-115 See Note 1
4 Upper and Lower Duck Bill 05-0103-118 See Note 2
5
Standard Band Latch Assembly, 6” – 12” pipe 05-0103-100 See Note 1
Standard Band Latch Assembly, 14” pipe & up 05-0103-102 See Note 1
6 Band Handle 05-0103-001 See Note 1
7 Band Stiffener 05-0103-007 See Note 3
8 Hex Head Cap Screw, 1/4-28NF x 1/2” long 10-14F0-012 See Note 3
9
Internal Locking Washer, 1/4”
12-0014-I00 See Note 3
10
Socket Head Cap Screw, 1/4"-20 x 5/8” long
11-14C0-058 2
11
1/4"-20 Lock Nut
1L-14C0-000 2
12
Socket Head Cap Screw, 1/4"-20 x 3/8” long
11-14C0-038 2