Mathey Dearman Band Machine - Manual (Page 5)

5
3.0 - ACCESSORIES
Torch Angle Head Adaptor (Part No. 05-0200-003)
This attachment allows the Torch to be adjusted to any bevel angle up to
90-degrees and permits adjustment for a lead or lag angle of the torch.
A 3/4” Button Tip (Victor Series 108 Cutting Tip) should be used when
cutting at 90 degree to pipe surface.
Right Angle Head Adaptor (Part No. 05-0117-030)
This attachment lets the Flexible Drive Cable Assembly swivel through
180 degrees. The feature decreases the amount of clearance needed
around the pipe to approximately 6” / 152mm for tight areas where
there is very little clearance.
Rack Adjustable Torch Holder (Part No. 05-0116-032)
This attachment provides horizontal and vertical rack adjustment of
Plasma or Oxy-fuel Machine Torches. The torch must be equipped with
a rack for vertical adjustment
Double Torch Arm (Part No. 05-0117-039)
The Double Torch Arm is a device used for mounting two standard oxy-fuel
or plasma torches to the Band Crawler.