Mathey Dearman Band Machine - Manual (Page 11)

11
5.3.7
Twist to release the Emergency Stop Switch.
5.3.8 Move the Forward/Stop/ Reverse Switch of the motor control box is in the “FORWARD or Reverse” position.
5.3.9 Slowly rotate the Speed Rheostat Switch clockwise to the “3” position on the dial.
5.3.10 Follow steps 5.2.11 through 5.2.14 of the instructions for the mounting the Manual band Crawler on the Band.
5.3.11 Depress the Emergency Stop Switch.
5.3.12 Move the Forward/Stop/ Reverse Switch of the motor control box is in the “STOP” position.
5.3.13 Rotate the Speed Rheostat Switch counterclockwise to the “0” position on the dial.
5.3.14 Follow the instructions for mounting the torch in the Band Crawler.
Figure 5
Warning: Use extreme care when plugging the Motor Control Box as
there is a risk of electrical shock and death if handled improperly.
Warning: There is a risk of electrical shock if the electrical cord between the Motor
Control Box and Band Crawler is pinched between the Wheel Assembly and the Band.