Marantz SR9600N - Manual (Page 52)

ENGLISH
48
• The video convert feature constantly monitors
input video signals and determines whether to
convert the input signals or not. However, some
input video signals cannot be detected correctly.
If this occurs, set “VIDEO CONVERT” in the
“VIDEO SETUP” menu to “DISABLE”.
Example:
Monitor is connected via component terminals.
Monitor is connected via the video or S-video
terminals.
The signal cannot be converted from component to
video or S-video.
Notes of OSD menu system :
• The setup menu can be displayed through all
video out terminals (“COMPONENT”, “S-
VIDEO”, and “VIDEO”).
• Setting information (e.g. volume setting) is
displayed through VIDEO and S-VIDEO out
terminals when the VIDEO CONVERT function is
set to “ENABLE”.
Note:
No setting information is displayed when the
signal is emitted from the COMPONENT IN to
COMPONENT OUT.
• Setting information (e.g. volume setting) is
displayed through the S-VIDEO or VIDEO
outputs when the VIDEO CONVERT function is
set to “DISABLE”. When the S-VIDEO and
VIDEO outputs are used simultaneously, the
setting information is displayed through the S-
VIDEO output only.
BASIC OPERATION
(PLAYBACK)
The remote control operations in this chapter are
performed with the remote control unit set to the A/
V Amp mode. To set the Amp mode, press the
A/V
Amp button on the Home menu of the remote
control unit.
SELECTING AN INPUT SOURCE
Before you can listen to any input media, you must
first select the input source on the SR9600.
Example: DVD
1. Select “ DVD ” by turning the INPUT SELECTOR
knob on the front panel.
Or, tap the “
A/V Amp ” on the remote control
unit and press the page up button until page
1/8 is displayed. Press the “ DVD ”.
2. After you have selected “ DVD ”, simply turn on
the DVD player and play the DVD.
• As the input source is changed, the new input
name will appear momentarily on the video
display. The input name will also appear in the FL
display on the front panel.
• As the input source is changed, the SR9600 will
automatically switch to the digital input, surround
mode, attenuation, and night mode status which
were entered during the configuration process
for that source.
• When an audio source is selected, the last video
input used remains routed to the VCR-1 & VCR-
2/DVD-R OUTPUT and MONITOR
OUTPUT.
This permits simultaneous viewing and listening
to different sources.
• When a video source is selected, the video signal
for that input will be routed to the MONITOR
OUTPUT jacks and will be viewable on a TV
monitor connected to the SR9600.
If a component video input is connected to the
COMPONENT 1 to 4 inputs, it will be routed to the
COMPONENT VIDEO OUTPUT. Make certain
that your TV is set to the proper input to view the
signal.
i.LINK FUNCTION
When an audio-supporting i.LINK device (source
devices only) is newly connected to the SR9600, a
temporary input source item specifically for the
i.LINK device is added between “
DVD ” and
“ AUX2 ”. It can be selected using the INPUT
SELECTOR knob or via the Input button on the
remote control unit.
EXAMPLE: WHEN “DVxxxx” OR “SAxxxx” i.LINK
DEVICE HAS BEEN NEWLY CONNECTED TO THE
SR9600
1. Select “ DVxxxx ” or “ SAxxxx ” by turning the
INPUT SELECTOR knob on the front panel.
Or, tap the “A/V Amp” on the remote control
unit and press the page up button until page
1/8 is displayed. Press the “ Input ”.
The input sources are displayed on the FL display
in the following order.
DVD ↔ ↔ ↔ ↔ ↔ LD ↔ ↔ ↔ ↔ ↔ TV ↔ ↔ ↔ ↔ ↔ DSS ↔ ↔ ↔ ↔ ↔ VCR1 ↔ ↔ ↔ ↔ ↔ VCR2 ↔ ↔ ↔ ↔ ↔
AUX1 ↔ ↔ ↔ ↔ ↔ TAPE ↔ ↔ ↔ ↔ ↔ CD-R ↔ ↔ ↔ ↔ ↔ CD ↔ ↔ ↔ ↔ ↔ TUNER1 ↔ ↔ ↔ ↔ ↔
TUNER2 ↔ ↔ ↔ ↔ ↔ AUX2 ↔ ↔ ↔ ↔ ↔ DVxxxx ↔ ↔ ↔ ↔ ↔ SAxxxx ↔ ↔ ↔ ↔ ↔
DVD...
Notes:
• “NO NAME” appears for devices for which there
is no name information.
• Analog/digital input cannot be switched. (See
page 56)
• The last selected input source is selected as the
video signal.
The temporary input source item for the i.LINK
device disappears in the following cases. In such
case, the selection returns to the last selected
input source.
• If the i.LINK device is disconnected or power to
the i.LINK device is turned off
• If the i.LINK device is assigned as an input source
• If power to the SR9600 is tuned off
VIDEO CONVERT
When this mode is activated, the video or
S-video signal can be emitted from the VIDEO, S-
VIDEO or COMPONENT VIDEO output terminal.
To activate this mode, select “
VIDEO CONVERT ”
from “ 4. VIDEO SETUP ” menu and set “ ENABLE ”.
Notes:
• The component video signal is emitted only from
the COMPONENT VIDEO output terminal.
When the video equipment is connected to
component terminals, connect the monitor and
SR9600 using the component terminals.
• This mode is unavailable for the REC out terminal.
• This mode is unavailable for still picture, fast
forward and reverse play on video component.
• If, while attempting to use the video convert
feature, the SR9600 cannot synchronize with the
display device, “NO SIGNAL” appears on the
monitor or noise is generated, this feature cannot
be used. All of these signs are caused by
equipment incompatibility; there is nothing
wrong with the SR9600.
If this occurs, set “VIDEO CONVERT” in the
“VIDEO SETUP” menu to “DISABLE”. Next,
connect the video input signal to the display
component via the MONITOR OUT terminal
under VIDEO and the S-video input signal to the
display component via the MONITOR OUT
terminal under S-VIDEO.
1/4 Home
wed Jun 01 4:40 pm
1/8 A/V Amp
Source Select
wed Jun 01 4:40 pm
2.
MULTI SPEAKER
F/P BAND THX THX PURE DIRECT PURE DIRECT UP DOWN TUNING
AUX 1 INPUT R AUDIO DIGITAL S-VIDEO L VIDEO POWER ON/OFF POWER ON/OFF
VOLUME
UP DOWN
INPUT SELECTOR INPUT SELECTOR
PHONES PHONES
STANDBY STANDBY
AV SURROUND RECEIVER SR9600 AV SURROUND RECEIVER SR9600
SURROUND SURROUND
MIC
ENTER MENU PURE DIRECT PURE DIRECT THX THX 7.1CH INPUT
MODE MODE AUTO AUTO MU MULTI
A/B
T-MODE MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS MRAC
AUTO TUNE
1.
1/8 A/V Amp
Source Select
wed Jun 01 4:40 pm
1.
MULTI SPEAKER
F/P BAND THX THX PURE DIRECT PURE DIRECT UP DOWN TUNING
AUX 1 INPUT R AUDIO DIGITAL S-VIDEO L VIDEO POWER ON/OFF POWER ON/OFF
VOLUME
UP DOWN
INPUT SELECTOR INPUT SELECTOR
PHONES PHONES
STANDBY STANDBY
AV SURROUND RECEIVER SR9600 AV SURROUND RECEIVER SR9600
SURROUND SURROUND
MIC
ENTER MENU PURE DIRECT PURE DIRECT THX THX
7.1CH INPUT
MODE MODE AUTO AUTO MU MULTI
A/B
T-MODE MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS MRAC
AUTO TUNE
1.
MULTI MULTI SPEAKER SPEAKER
F/P F/P BAND BAND THX THX PURE DIRECT PURE DIRECT UP UP DOWN DOWN TUNING TUNING
AUX 1 INPUT AUX 1 INPUT R R AUDIO AUDIO DIGITAL DIGITAL S-VIDEO S-VIDEO L L VIDEO VIDEO POWER ON/OFF POWER ON/OFF
VOLUME VOLUME
UP UP DOWN DOWN
INPUT SELECTOR INPUT SELECTOR
PHONES PHONES STANDBY STANDBY
AV SURROUND RECEIVER SR9600 AV SURROUND RECEIVER SR9600
SURROUND SURROUND
MIC MIC ENTER ENTER MENU MENU PURE DIRECT PURE DIRECT THX THX 7.1CH INPUT 7.1CH INPUT MODE MODE AUTO AUTO MULTI MULTI A/B A/B T-MODE T-MODE MEMORY MEMORY CLEAR CLEAR DISPLAY DISPLAY EXIT EXIT SPEAKERS SPEAKERS MRAC MRAC AUTO TUNE AUTO TUNE
VIDEO
or S-VIDEO
or component
component
MULTI MULTI SPEAKER SPEAKER
F/P F/P BAND BAND THX THX PURE DIRECT PURE DIRECT UP UP DOWN DOWN TUNING TUNING
AUX 1 INPUT AUX 1 INPUT R R AUDIO AUDIO DIGITAL DIGITAL S-VIDEO S-VIDEO L L VIDEO VIDEO POWER ON/OFF POWER ON/OFF
VOLUME VOLUME
UP UP DOWN DOWN
INPUT SELECTOR INPUT SELECTOR
PHONES PHONES STANDBY STANDBY
AV SURROUND RECEIVER SR9600 AV SURROUND RECEIVER SR9600
SURROUND SURROUND
MIC MIC ENTER ENTER MENU MENU PURE DIRECT PURE DIRECT THX THX 7.1CH INPUT 7.1CH INPUT MODE MODE AUTO AUTO MULTI MULTI A/B A/B T-MODE T-MODE MEMORY MEMORY CLEAR CLEAR DISPLAY DISPLAY EXIT EXIT SPEAKERS SPEAKERS MRAC MRAC AUTO TUNE AUTO TUNE
VIDEO
or S-VIDEO
VIDEO
or S-VIDEO
MULTI MULTI SPEAKER SPEAKER
F/P F/P BAND BAND THX THX PURE DIRECT PURE DIRECT UP UP DOWN DOWN TUNING TUNING
AUX 1 INPUT AUX 1 INPUT R R AUDIO AUDIO DIGITAL DIGITAL S-VIDEO S-VIDEO L L VIDEO VIDEO POWER ON/OFF POWER ON/OFF
VOLUME VOLUME
UP UP DOWN DOWN
INPUT SELECTOR INPUT SELECTOR
PHONES PHONES STANDBY STANDBY
AV SURROUND RECEIVER SR9600 AV SURROUND RECEIVER SR9600
SURROUND SURROUND
MIC MIC ENTER ENTER MENU MENU PURE DIRECT PURE DIRECT THX THX 7.1CH INPUT 7.1CH INPUT MODE MODE AUTO AUTO MULTI MULTI A/B A/B T-MODE T-MODE MEMORY MEMORY CLEAR CLEAR DISPLAY DISPLAY EXIT EXIT SPEAKERS SPEAKERS MRAC MRAC AUTO TUNE AUTO TUNE
VIDEO
or S-VIDEO component
SR9600N DFU_01_ENG 4_4 05.5.23, 5:56 PM Page 48 Adobe PageMaker 6.5J/PPC