Marantz NR1601 - Manual (Page 62)

56
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Operating the connected devices by remote control unit
Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.
Operating AV equipment
1 Press the input source select
button (vpage 21).
The operation mode of the remote
control unit is switched as shown in the
table.
NOTE
Press the input source select buttons once
to switch the operation mode of the remote
control unit supplied with this unit.
Press the input source select buttons twice
consecutively to switch the operation mode
of the remote control unit and input source
of this unit.
Input
source
select
buttons
Input source
of this unit
Devices controllable with the remote
control unit
(Operation mode)
z BD Device registered on the BD button
z DVD Device registered on the DVD button
z SAT Device registered on the SAT button
GAME Device registered on the GAME button
AUX1 Device registered on the AUX1 button
USB Device registered on the USB button
z TV Device registered on the TV button
z CD Device registered on the CD button
TUNER Radio of this unit
M-XPort Device registered on the M-XP button
z If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
NOTE
If the mode of the remote control unit is set to other than amp-
operation mode, press
AMP to switch the remote control unit to the
amp-operation mode to perform the following operations:
• For menu operation by pressing
MENU
• For setting the channel level of the unit by pressing CH LVL
• For performing direct playback
• For switching the MultEQ, Dynamic EQ, and Dynamic Volume
settings.
• For using the Video Select function.
• For using the sleep timer function.
• For displaying the Source Select screen.
• For switching the M-DAX function.
• For directly selecting "AUTO" and "STEREO" of the listening modes
.
2 Operate this unit or the device whose input source is
switched.
• For details, refer to the operating instructions for each device.
For operations of iPod and TUNER, see the following pages.
• iPod (vpage 22)
• TUNER (vpage 26)
Registering preset codes
When preset codes are registered in the included remote control unit,
it can then be used to operate any devices you have, such as DVD
players or TVs made by different manufacturers.
n Buttons used for operating the devices
q SOURCE ON/OFF
For switching power of each device on or off.
w uio p , ENTER
For menu operation of each device.
e MENU , SETUP , TOP MENU
For displaying the menu of each device.
r 1 , 2 , 3 , 6 , 7 , 8 , 9
t Number button ( 0 – 9 , +10 )
y PRESET + , PRESET –
u TV POWER , TV INPUT
For operating a TV
This button is enabled in any mode.
For details on operation with the remote control unit, see pages 22
to 23, 26, and 58.
n Default settings for preset codes
The devices shown below are registered for each input source
button as default. Settings can be changed according to the
devices to be used.
Input source select
buttons
Category Preset code
Blu-ray Disc player 5000
DVD player 2000
Television 1000
Satellite set top box 4000
CD player 3000
NOTE
• No preset codes other than BD , DVD , TV , SAT and CD can be
registered.
• In the factory settings, remote control codes for all Marantz products
are registered.