Marantz PM-14S1 - Manual (Page 24)

16
ENGLISH
Playback
INPUT SELECTOR
SPEAKERS/
TREBLE
BASS
TONE/
ATT.
VOLUME df
ATT
VOLUME
INPUT df
MENU
X
X AMP
df 1
TONE
indicator
indicator
Turning the power on
Press X on the unit.
• The power indicator lights in blue.
• The unit will be ready to start playback after several seconds.
Turning the power standby
Press X AMP.
• The power is set to the standby mode.
• The Standby status indicator lights in red.
• Press X AMP to turn on power from standby mode.
• You can also turn on power by using either INPUT SELECTOR
on this unit from standby mode.
NOTE
Power continues to be supplied to some of the circuitry even
when the power is in the standby mode. When leaving home
for long periods of time or when going on vacation, either
press X to turn off the power, or unplug the power cord from
the power outlet.
Turning the power off
Press X on the unit.
• Power is turned off.
• All indicators will turn off.
Turning speaker output on
Press SPEAKERS on the unit.
SPEAKERS indicator lights.
Selecting the input source
Use INPUT df to be played back.
The selected input source appears on the display.
You can also select the input source by turning INPUT
SELECTOR on the main unit.
Adjusting the volume
Use VOLUME df to adjust the volume.
You can also adjust the volume by turning VOLUME on the
main unit.
1.PM14S1N_ENG_Final_0708.indd 16 2013/07/11 19:14:17