Marantz SR5005 - Manual (Page 59)

56
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Manual Setup
Set when changing Audyssey® Auto Setup settings, or when changing the audio, video, display
or other settings.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible
to set MultEQ®, Dynamic EQ® and Dynamic Volume® (vpage 53, 54).
• Can be used without changing the settings. Please set if necessary.
Menu operation
1
Press AMP to set the remote control unit to amplifier operation
mode.
2
Press MENU .
The menu is displayed on the TV screen.
3
Press ui to select the menu to be set or operated.
4
Press ENTER to enter the setting.
• To return to the previous item, press RETURN .
• Exiting the Menu, press MENU while the menu is displayed.
The menu display disappears.
Items that can be set with the Manual Setup procedure
4-1.Speaker Setup
1.Amp Assign
2.Speaker Config.
3.Bass Setting
4.Distance
6.Crossover Freq.
7.Front Sp Setup
5.Channel Level
[ENT]:Select [RTN]:Back
4-2.HDMI Setup
Auto Lipsync : ON
HDMI Audio Out : Amp
HDMI Control : OFF
[RTN]:Back
4-3.Audio Setup
1.EQ Customize
[ENT]:Select [RTN]:Back
4-4.ZONE2 Setup
Bass : 0dB
Treble : 0dB
HPF : OFF
Level Lch : 0dB
Level Rch : 0dB
Channel : Stereo
[RTN]:Back
4-5.Option Setup
1.Volume Control
2.Source Delete
3.On-Screen Display
4.Zone Rename
5.DC Trigger
6.Display
7.Setup Lock
[ENT]:Select [RTN]:Back
Speaker Setup (vpage 56)
ZONE2 Setup (vpage 59) Option Setup (vpage 60)
HDMI Setup (vpage 58) Audio Setup (vpage 59)
Speaker Setup
Default settings are underlined.
Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select
MultEQ, Dynamic EQ and Dynamic Volume (vpage 53, 54).
• Manual Setup can be used without changing the settings. Please set if necessary.
Setting items Setting details
Amp Assign
Set the speakers connected
to this unit. Normal : Set when using 7.1-channel (Front/Center/Surround/Surround
Back or Front Height/Subwoofer) speakers.
ZONE2 : Set for connecting the speakers for ZONE2 to the SURR. BACK/
AMP ASSIGN terminals.
SPKR-C : Set for connecting a tweeter of a front speaker to the SURR.
BACK/ AMP ASSIGN terminals and a woofer of the front speaker to the
FRONT A terminals.
Speaker Config.
Select speaker configuration
and size (bass reproduction
capability).
NOTE
Do not use the outward
shape of the speaker to
determine selection of a
“Large” or “Small” speaker.
Instead, use the frequencies
set in “Crossover Freq.”
(vpage 58) as the standard
for determining bass
reproduction capability.
Front : Set the front speaker size.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• When “Subwoofer” is set to “No”, “Front” is automatically set to
“Large”.
• When “Front” is set to “Small”, “Center”, “Surround“, “Surround
Back” and “Front Height” can not be set to “Large”.
Center : Set the presence and size of the center speaker.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when a center speaker is not connected.
“Large” is not displayed when “Front” is set to “Small”.
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When “Front” is set to “Small”, “Subwoofer” is automatically set to
“Yes”.
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu