Marantz SR5005 - Manual (Page 31)

28
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
n Listening to preset stations
1
Press SHIFT/TOP MENU to select
the memory block (A to G).
2
Press PRESET + , PRESET – or
1 – 8 to select the desired preset
channel.
You can also operate via the main unit. In this
case, perform the following operations.
Press o p to select the preset radio station.
n Direct frequency tuning
You can enter the receiving frequency directly to tune in.
1
Press SEARCH/INFO .
2 Input frequencies using the 0 – 9.
• If o is pressed, the immediately preceding
input is cancelled.
3 When setting is completed, press
ENTER .
The preset frequency is tuned in.
n Tuner (FM/AM) operation
Operation buttons Function
PRESET +, – Preset channel selection
uio p Cursor operation
ENTER Enter
SEARCH Direct frequency tuning
BAND FM/AM switching
T.MODE Switch search modes
TUNING +, – Tuning (up/down)
0 – 9
Preset channel selection (1 – 8) /
Direct frequency tuning (0 – 9)
SHIFT Preset channel block selection
MEMORY Preset memory registration
TV POWER
TV power on/standby
(Default : Marantz)
TV INPUT
Switch TV input
(Default : Marantz)
Tuning in radio stations
Switching the tuning increment
The tuning increment factory settings are 9kHz for AM, and 0.05
MHz for FM.
o p
DISPLAY AUTO ON/STANDBY
1
While pressing down AUTO and DISPLAY , press ON/
STANDBY to turn on the power.
“Step 0 AM9/FM50 1 ” appears on the display.
2
Press o p .
“Step 0 AM10/FM200 1 ” appears on the display, and the
tuning increment is switched to AM and FM are 10 kHz and
0.2 MHz.
3
Press ON/STANDBY .
• The tuner preset memory will be cleared if this operation is
performed.
• This setting will not revert to the default values even when the
microprocessor is reset.